Looking for help?
Find answers to your questions
-
Installing Your System
- Downloading the Mobile App
- Unboxing Your System
- Connecting To WiFi
- Welcome Letter
- Adding Sensors
- Understanding Zone Types
- Testing Your System
- Adding Smart Home Devices
- Adding Video Devices
- Managing User Codes
- How Do I Set Up Rules, Scenes, and Schedules?
- Managing Notifications
- Rebooting the Interactive Panel
- Creating System Event Notifications
- Interactive Touchscreen Overview
- How to Arm and Disarm Your System
- Arming Modes and Options
- How Do I Cancel An Alarm?
- Panic Buttons
- Geo-Services
- Bluetooth Touchless Disarming
- Two Factor Authentication
- Deleting A Device
- How to change or reset password
- Highlights
- Mobile App vs Web Portal Experience
- Alarm.com Knowledgebase
- Video Analytics
- Video Ground Zones and Trip Wires
- Video Recording and Rules Notifications
- Viewing Saved Video
- Streaming Live Video to the Touchscreen
- Video Cloud Storage
Indoor Camera
Table of Contents
Crystal-clear 1080p HD video, infrared night vision and secure cloud recording make the Comporium Indoor Wi-Fi Security Camera from Alarm.com ideal for indoor video monitoring. With its compact design and flexible mounting options, the Indoor Wi-Fi Security is easy to install – whether mounted on a wall or ceiling or simply placed on a shelf.
Specifications
- HD 1080p video
- IR night vision
- Wide dynamic range (WDR)
- Two-Way Audio
- Minimum Bandwidth Requirements
- Without Two-Way Audio: 0.5 Mbps
- With Two-Way Audio: 1 Mbps
View the Alarm.com Knowledge Base for more in-depth support details.
Installation Guide
- From the Alarm.com Mobile App, tap the hamburger menu (3 stacked lines) in the upper left hand corner.
- Choose "Add Devices"
- Choose "Video Camera"
- Choose "ADC-V515" and follow the prompts
Download the installation guide.
Refer to the Alarm.com Knowledge Base for more information
Troubleshooting Your Camera
View our Video Troubleshooting Guide if you are having trouble viewing your camera.
LED Guide
|
LED Pattern |
Status |
Descritpion |
|
Green | Solid |
Connected To The Internet | Local Network and internet connection with Alarm.com IP |
|
Green | Flashing |
Local Network Connection | Local network connection with local IP address, no internet. |
|
Red | Solid |
Power On, or No Network Connection | Power on, system booting up typically 60-90 seconds. If solid red for longer than 60-90 seconds, then there is no local or Internet connection. |
|
Red | Flashing |
Camera Powering On or Updating Firmware | Camera is powering on, or a firmware update is in progress. |
|
Blue | Flashing |
WPS Mode | WPS mode is active. To enter WPS mode, press and hold the WPS button for about three seconds. |
|
White | Flashing |
AP Mode | Wi-Fi access point (AP) mode is active. To enter AP mode, press and hold the WPS button for about six seconds. |
|
Red & Green | Flashing |
Factory Reset | The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, press and hold the reset button for about 10-15 seconds. |
Deleting or Removing a Device
These steps work for the following devices: Indoor Camera, Outdoor Camera, 180 HD Camera, Video Doorbell, and SVR.
From the Alarm.com mobile app
- Tap Menu
- Tap Manage Devices
- Tap the 3 dots beside the device name to view the actions menu
- Tap Remove Device
Updated on 15 Nov 2023