HD 180 Camera
Table of Contents
The Comporium HD 180 Camera is a wide-angle camera designed for high-end residential video monitoring. The HD 180 Camera sets itself apart through forward-looking features and a clean modern design. Covering a full 180° view, users can monitor large areas without having to purchase multiple cameras. With a simple button push on top of the camera, a user can initiate a video and Two-Way Audio call with the Alarm.com app.
- Two way Audio
- Power over Ethernet
- IR night vision
- 180° FOV
- Digital pan/tilt/zoom
- Tap to call out
- Bluetooth music streaming
- Minimum Bandwidth Requirements
- Without Two-Way Audio: 0.5 Mbps
- With Two-Way Audio: 1 Mbps
- PoE Standard
- IEEE 802.3af
View the Alarm.com Knowledge Base for more details support information.
- From the Alarm.com Mobile App, tap the hamburger menu (3 stacked lines) in the upper left hand corner.
- Choose "Add Devices"
- Choose "Video Camera"
- Choose "ADC-V622-WELL" and follow the prompts
Refer to the Alarm.com Knowledge Base for more information.
Troubleshooting Your Camera
View our Video Troubleshooting Guide if you are having trouble viewing your camera.
Green | Solid
|Connected To The Internet||Local Network and internet connection with Alarm.com IP|
Green | Flashing
|Local Network Connection||Local network connection with local IP address, no internet.|
Red | Solid
|No Network Connection||No Local or Internet connection.|
Red | Flashing
|Camera Powering On or Updating Firmware||Camera is powering on, or a firmware update is in progress.|
Blue | Flashing
|WPS Mode||WPS mode is active. To enter WPS mode, press and the menu button and use the volume buttons to scroll to WPS Mode|
White | Flashing
|AP Mode||Wi-Fi Access Point (AP) Mode is Active. To enter AP mode, Press the Menu Button and Use the Volume Buttons to Scroll to Access Point Mode|
Yellow | Flashing
|Bluetooth Pairing||Bluetooth pairing mode is active. To pair with Bluetooth, press the Menu button and use the Volume buttons to scroll to Bluetooth mode.|
Red & Green | Flashing
|Factory Reset||The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, press the Menu button and use the Volume buttons to scroll to the Factory Reset option. Follow the audio prompts to initiate a factory reset.|
Deleting or Removing a Device
These steps work for the following devices: Indoor Camera, Outdoor Camera, 180 HD Camera, Video Doorbell, and SVR.
From the Alarm.com mobile app
- Tap Menu
- Tap Manage Devices
- Tap the 3 dots beside the device name to view the actions menu
- Tap Remove Device