Looking for help?
Find answers to your questions
-
Installing Your System
- Downloading the Mobile App
- Unboxing Your System
- Connecting To WiFi
- Welcome Letter
- Adding Sensors
- Understanding Zone Types
- Testing Your System
- Adding Smart Home Devices
- Adding Video Devices
- Managing User Codes
- How Do I Set Up Rules, Scenes, and Schedules?
- Managing Notifications
- Rebooting the Interactive Panel
- Creating System Event Notifications
- Interactive Touchscreen Overview
- How to Arm and Disarm Your System
- Arming Modes and Options
- How Do I Cancel An Alarm?
- Panic Buttons
- Geo-Services
- Bluetooth Touchless Disarming
- Two Factor Authentication
- Deleting A Device
- How to change or reset password
- Highlights
- Mobile App vs Web Portal Experience
- Alarm.com Knowledgebase
- Video Analytics
- Video Ground Zones and Trip Wires
- Video Recording and Rules Notifications
- Viewing Saved Video
- Streaming Live Video to the Touchscreen
- Video Cloud Storage
Table of Contents
Outdoor Siren
Table of Contents
The Outdoor Siren from Comporium is designed for installation in areas where wiring is difficult or not possible. The outdoor siren is self powered and provides the perfect solution for home owners looking for an external siren that is both affordable and easy to install. The Outdoor Siren combines form and function to provide improved protection against intruders, before they get the chance to enter the home.
Specifications
- Dimensions: 11.63"x7.31"x2.5"
- Battery Life: 8 years
- Battery Type: 3.6V, Li-Thionyl Chloride 0-102710
- Weight: 34oz
- Operating Temperature: -27.4°F to 158°F
- IP55 Rating
Installation Guide
- Loosen plastic cover screw and remove the cover. Release the catch and open battery cover. Using the cable adapter, connect batteries to the proper connectors.
- From the Touchscreen, navigate to Settings by swiping down from the top of your Touchscreen.
- Navigate to Advanced Settings > Enter your Master Code
- If you do not know your master code, from the Alarm.com mobile app, navigate to Users and choose the user labeled “Master”.
- Tap “Panels” to view the 4-digit master code.
- Tap Security Sensors
- Tap Auto Learn Sensor
- Press and hold the device enroll button until the LED lights steady and then release the enroll button while the LED is still lit. A confirmation message then appears on the Interactive Touchscreen
- Once the siren is recognized, change the source type to Power G (if it is not automatically changed) and rename your siren.
- Download the Installation Guide
Deleting or Removing a Device
These steps work for the following devices: Entry Sensors, Motion Sensors, Glassbreak Sensors, External Sirens, Outdoor Sirens, Keyfobs, Carbon Monoxide Sensors, Smoke Sensors, and Flood Sensors.
- Swipe down on the touchscreen and choose Settings
- Tap Advanced Settings
- Enter Master Code (The primary code set up at installation. This is most likely recorded in your Interactive Guide).
- Tap Security Sensors
- Tap Delete Sensor
- Check the box next to the sensor you want to remove
- Tap Delete
Refer to the Alarm.com Knowledge Base for more information.
Updated on 15 Nov 2023