Looking for help?
Find answers to your questions
-
Installing Your System
- Downloading the Mobile App
- Unboxing Your System
- Connecting To WiFi
- Welcome Letter
- Adding Sensors
- Understanding Zone Types
- Testing Your System
- Adding Smart Home Devices
- Adding Video Devices
- Managing User Codes
- How Do I Set Up Rules, Scenes, and Schedules?
- Managing Notifications
- Rebooting the Interactive Panel
- Creating System Event Notifications
- Interactive Touchscreen Overview
- How to Arm and Disarm Your System
- Arming Modes and Options
- How Do I Cancel An Alarm?
- Panic Buttons
- Geo-Services
- Bluetooth Touchless Disarming
- Two Factor Authentication
- Deleting A Device
- How to change or reset password
- Highlights
- Mobile App vs Web Portal Experience
- Alarm.com Knowledgebase
- Video Analytics
- Video Ground Zones and Trip Wires
- Video Recording and Rules Notifications
- Viewing Saved Video
- Streaming Live Video to the Touchscreen
- Video Cloud Storage
Table of Contents
Keyfob
Table of Contents
The wireless 4 Button Keyfob from Comporium combines straightforward security system management with the added confidence of portable personal protection. The compact key lets users easily arm/disarm their Comporium security system or, if needed, call for help, when in close proximity to, or inside, the premise.
Specifications
- Dimensions: 2.4"x1.4"x0.5"
- Battery Life: 8 years
- Battery Type: One (1) 3V, CR2032 Lithium Battery
- Weight: 0.9oz
- Operating Temperature: 14°F to 131°F
Installation Guide
- Remove the battery pull tab from the keyfob.
- From the Interactive Touchscreen, navigate to Settings by swiping down from the top of the screen.
- From Settings, navigate to Advanced Settings > Enter your Master Code
- If you do not know your master code, from the Alarm.com mobile app, navigate to Users and choose the user labeled “Master”.
- Tap “Panels” to view the 4-digit master code.
- Tap Security Sensors
- Tap Auto Learn Sensors
- Activate your keyfob by pressing the Arm and Disarm buttons at the same time.
- Once the sensor is recognized change the source type to Power G (if it is not automatically changed) and rename your keyfob.
- Download the User Guide
Deleting or Removing a Device
These steps work for the following devices: Entry Sensors, Motion Sensors, Glassbreak Sensors, External Sirens, Outdoor Sirens, Keyfobs, Carbon Monoxide Sensors, Smoke Sensors, and Flood Sensors.
- Swipe down on the touchscreen and choose Settings
- Tap Advanced Settings
- Enter Master Code (The primary code set up at installation. This is most likely recorded in your Interactive Guide).
- Tap Security Sensors
- Tap Delete Sensor
- Check the box next to the sensor you want to remove
- Tap Delete
Refer to the Alarm.com Knowledge Base for more information.
Updated on 15 Nov 2023