Product Help - Indoor Camera

Crystal-clear 1080p HD video, infrared night vision and secure cloud recording make the Comporium Indoor Wi-Fi Security Camera from Alarm.com ideal for indoor video monitoring. With its compact design and flexible mounting options, the Indoor Wi-Fi Security is easy to install – whether mounted on a wall or ceiling or simply placed on a shelf.
  • HD 1080p video
  • IR night vision
  • Wide dynamic range (WDR)
  • Two-Way Audio
  • Minimum Bandwidth Requirements
    • Without Two-Way Audio: 0.5 Mbps
    • With Two-Way Audio: 1 Mbps

LED Guide

LED Pattern

Status

Descritpion

Green | Solid

 Connected To The Internet Local Network and internet connection with Alarm.com IP

Green | Flashing

 Local Network Connection Local network connection with local IP address, no internet.

Red | Solid

 Power On, or No Network Connection Power on, system booting up typically 60-90 seconds. If solid red for longer than 60-90 seconds, then there is no local or Internet connection.

Red | Flashing

 Camera Powering On or Updating Firmware Camera is powering on, or a firmware update is in progress.

Blue | Flashing

 WPS Mode WPS mode is active. To enter WPS mode, press and hold the WPS button for about three seconds.

White | Flashing

 AP Mode Wi-Fi access point (AP) mode is active. To enter AP mode, press and hold the WPS button for about six seconds.

Red & Green | Flashing

 Factory Reset The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, press and hold the reset button for about 10-15 seconds.

Installation Guide

  • From the Alarm.com Mobile App, tap the hamburger menu (3 stacked lines) in the upper left hand corner.
  • Choose "Add Devices"
  • Choose "Video Camera"
  • Choose "ADC-V515" and follow the prompts

Click HERE to download the installation guide.

Refer to the Alarm.com Knowledge Base for more information.